Screw lock and hand lock with tension band (10 and 18 mm band width)

tubing - hoses - pipes - clamps & accescories > Hose clips - Hose clamps > Screw lock and hand lock with tension band (10 and 18 mm band width)

已选总价:￥0.00
已选数量:0件

所有费用均已包含增值税，不含运费。运费详情请参阅运费指导书。

产品详情与编号

序号	产品编号	名称	Weight	Ø voltage range [mm]	Version	Tape width [mm]	售价
	全部	全部	全部	全部	全部	全部
1.0	SSS 40/10 ES		11g / pc.	40 - 100	Screw lock	10	￥44.16
2.0	SSKB 20/18 ES		1.7kg / pc.	-	clamping band (20 m)	18	￥1158.16
3.0	SSKB 10/18 ES		950g / pc.	-	clamping band (10 m)	18	￥593.60
4.0	SSH 35/10 ES		16g / pc.	35 - 60	Hand retention lock	10	￥51.92
5.0	SSS 100/10 ES		11g / pc.	over 100	Screw lock	10	￥47.60
6.0	SSH 60/10 ES		15g / pc.	over 60	Hand retention lock	10	￥50.88
7.0	SSKB 20/10 ES		550g / pc.	-	clamping band (20 m)	10	￥690.08
8.0	SSS 80/18 ES		60g / pc.	80 - 150	Screw lock	18	￥220.96
9.0	SSKB 10/10 ES		280g / pc.	-	clamping band (10 m)	10	￥339.36
10.0	SSS 150/18 ES		65g / pc.	over 150	Screw lock	18	￥227.28

注：本公司对上述参数保有最终解释权，如若变动，恕不通知。

Screw lock and hand lock with tension band (10 and 18 mm band width)

Materials: 1.4301
Assembly with a screw lock: Measure tape and cut approx. 10 cm longer than hose coil, clip screw lock and fold back approx. 3 cm behind the main band, place around the hose and clip into safety hinge, tighten and finish.
Assembly with a manual turnbuckle: Measure tape and cut approx. 10 cm longer than hose coil, clip manual turnbuckle and fold back approx. 3 cm behind the main band, place around the hose and clip into safety hinge, tighten and finish.

Catalogue page Pneumatic Atlas 8 (Page 354) Suitable accessories:

Diagonal cutters (DIN IS 5749), KNIPEX

Flat round pliers with cutter (DIN ISO 5745), KNIPEX

Screwdriver, Wera / Wiha

Bit holder

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.